Prior to this change, attempting to decrease the speed limit below 100% in hardmode would display the new attempted speed and then warn that the speed can not be decreased below 100%; this disables that first message under those conditions.
This lets us reduce the number of USE_RETRO_ACHIEVEMENTS ifdefs in the
code base, reducing visual clutter. In particular, needing an ifdef for
each call to IsHardcodeModeActive was annoying to me. This also reduces
the risk that someone writes code that accidentally fails to compile
with USE_RETRO_ACHIEVEMENTS disabled.
We could cut down on ifdefs even further by making HardcodeWarningWidget
always exist, but that would result in non-trivial code ending up in the
binary even with USE_RETRO_ACHIEVEMENTS disabled, so I'm leaving it out
of this PR. It's not a lot of code though, so I might end up revisiting
it at some point.
Enable emulator hotkeys and controller input (when that option is
enabled) when a TAS Input window has focus, as if it was the render
window instead. This allows TASers to use frame advance and the like
without having to switch the focused window or disabling Hotkeys Require
Window Focus which also picks up keypresses while other apps are active.
Cursor updates are disabled when the TAS Input window has focus, as
otherwise the Wii IR widget (and anything else controlled by the mouse)
becomes unusable. The cursor continues to work normally when the render
window has focus.
The names attached to the BadgeStatus object are obsolete and unneeded and are removed from everything that uses them. All BadgeStatus references are updated to just Badge.
Achievement badges/icons are refactored into the type CustomTextureData::ArraySlice::Level as that is the data type images loaded from the filesystem will be. This includes everything that uses the badges in the Qt UI and OnScreenDisplay, and similarly removes the OSD::Icon type because Level already contains that information.
Was informed by the RetroAchievements team that this isn't an option in most emulators, and as the next commits will be to enable default icons, there will always be something to display.
On Windows:
wsi.render_window being set will set/save the initial geometry, which will cause sizing bugs until it's set again by the user resizing/repositioning.
If achievements were disabled but a player token is in settings, prior to this change the Achievement Manager dialog would show a box with no player name and score zero, which is unnecessary.
Previously the Achievements option would only show up if achievements were already enabled, requiring users to manually create a config file in the file system; this now makes it visible no matter what.
Bugfix for hardcore-disabled items being disabled when hardcore was true but achievement integration was false, which should mean hardcore is effectively disabled. Now everything checks the IsHardcoreModeActive method in AchievementManager which processes the setting AND the game state to determine if hardcore mode is actually active.
Spectator Mode is a new mode added by rc_client that allows for achievement and leaderboard functionality, but does not submit this data to the site, partially allowing for offline achievements. It effectively replaces the former settings for disabling achievements, leaderboards, and RP, which are now always active internally as long as the client is active.
The client can take care of itself and handle its own hardcore status when it toggles, so I can tell the settings widget to contact the manager directly to set it.
Also, gradually reorganizing the settings dialog over the next handful of commits.
The client can handle media changes natively so disabling can take place internally. This code uses the same external calls to load data, but will call either BeginLoad or BeginChangeMedia based on whether any media is already loaded.
Due to the client's handling of media changes (it simply disables hardcore if an unknown media is detected) the existing functionality for "disabling" the achievements is no longer necessary and can be deleted.
Two portions of this need updating.
Anything related to points and unlock counts and scoring uses game_summary now instead of the TallyScore method. Unfortunately this comes with the drawback that I cannot easily at this time access the number of points/unlocks from the other hardcore mode, so things like the second progress bar have been deleted.
Rich presence, which no longer needs to be stored, but can be calculated at request. As the AchievementHeader can now update just the Rich Presence, DoFrame can now simply call a header update with .rp=true and the current Rich Presence will be calculated immediately.
As the two items above are the last remaining things to use a number of the components in AchievementManager, this also deletes: Request V1 (V2 is renamed accordingly), ResponseType, PointSpread, TallyScore, UnlockStatus, and the RP generation and ping methods.
UpdateData in AchievementsWindow now only updates the components being requested, massively improving the window's performance. The parameter is UpdatedItems in AchievementManager, which tracks which portions of the system have been updated for every update callback.
Similarly to the Progress widget (though without the separate object for each box, because each Leaderboard unit is just three text fields stacked vertically), AchievementLeaderboardWidget.UpdateData will now accept three options: destroy all and rebuild, update all, or update a set of rows.
As part of this, AchievementManager::GetLeaderboardsInfo has been refactored to GetLeaderboardInfo to return a single leaderboard for the ID passed in.
AchievementProgressWidget maintains in memory a map of AchievementBox pointers so that UpdateData can operate on them individually. UpdateData is overhauled for three options: UpdateData(true) will destroy the entire list and re-create it from scratch as before, to be used if the game or player changes/closes/logs out. UpdateData(false) will loop through the map and call UpdateData on every achievement box, to be used for certain settings changes such as enabling badges or disabling hardcore mode. UpdateData(set<IDs>) will call UpdateData on only the IDs in the set, to be used when achievements are unlocked.
AchievementBox is an extension of QGroupBox that contains the data for a single achievement, initialized with the achievement data and able to reference AchievementManager to update itself.
This change was primarily made to refactor the badge fetching to use the client instead of the runtime, but in the process I also refactored the code to cut down on complexity and duplication. Now the FetchBadge method is passed a function that generates the badge name; this is used to ensure that once the badge is loaded that it is still the desired badge to avoid race conditions.
HashGame has become LoadGame, similar structure with the file loaders but using the client instead. LoadGameCallback has been created to handle the results. The old LoadGameSync has been deleted as have
several hash and load methods that it called.
Deletes AchievementManager::Login, renames LoginAsync to Login, and replaces the one synchronous call in the AchievementSettingsWidget with the async call. There is a minor usability regression in that the UI currently does not notify the user when a login has failed; this will be addressed in a later change (possibly in a different PR).
On Windows 11, when playing windowed in a separate window/widget from the main emulator window, we don't want the window to have rounded corners, as it prevents the corner pixels from being visible
Move CheatManager's child widgets into scroll areas to allow making the
window smaller than the default.
In CheatSearchWidget, enable word wrapping for the label describing the
address space and search type to help it fit better inside a narrower
window.
There were three distinct mechanisms for signaling symbol changes in DolphinQt: `Host::NotifyMapLoaded`, `MenuBar::NotifySymbolsUpdated`, and `CodeViewWidget::SymbolsChanged`. The behavior of these signals has been consolidated into the new `Host::PPCSymbolsUpdated` signal, which can be emitted from anywhere in DolphinQt to properly update symbols everywhere in DolphinQt.
With this, I intend to make it clearer that Auto, Force 4:3, Force 16:9
and Custom are really the same thing, just with the aspect ratio of the
simulated TV being selected in a different way. I also extended the
introduction in a way I feel will clarify things but which you are
welcome to bikeshed :)
I was thinking of this during the review of 41b19e262f, but wanted to
put it in a separate PR as to avoid blocking it on bikeshedding.
I'm a bit unsure what to do about the word "analog" in "analog TV". I
felt that repeating it for each of these options would be too
repetitive. I suppose there's a reason why we used the word originally,
but digital TVs do give you basically the same aspect ratio for GC/Wii
games as analog TVs. (Of course, whether it's 4:3-like or 16:9-like
depends on what aspect ratio you set in the TV's settings, but that's
the case for widescreen CRTs too.)
This implements the GameCube modem adapter. This implementation is stable but not perfect; it drops frames if the receive FIFO length is exceeded. This is probably due to the unimplemented interrupt mentioned in the comments. If the tapserver end of the connection is aware of this limitation, it's easily circumvented by lowering the MTU of the link, but ideally this wouldn't be necessary.
This has been tested with a couple of different versions of Phantasy Star Online, including Episodes 1 & 2 Trial Edition. The Trial Edition is the only version of the game that supports the Modem Adapter and not the Broadband Adapter, which is what made this commit necessary in the first place.
This expands the tapserver BBA interface to be available on all platforms. tapserver itself is still macOS-only, but newserv (the PSO server) is not, and it can directly accept local and remote tapserver connections as well. This makes the tapserver interface potentially useful on all platforms.
Window icon was missing from QDialog lacking a parent.
Giving the QDialog a parent revealed I had failed to make it properly non-modal, necessitating further changes.
Settings save less often, now only upon destruction.
Construction of BranchWatchDialog is now deferred.
* Fix irregularly shaped corners
* Remove extra space for BalloonTips with no message or no title
* When the target tip location is not on a screen, put the tooltip on
the mouse's screen instead of the primary screen
* Fix description getting cut off when the title was too long
* Expose border width as a parameter
* Fix spacing and sizing issues with larger border widths
Most obviously, there is no longer a warning message to the player in the achievement window that achievements are disabled if a game is not currently running.
Adds a setting field under the hood to retain which folder the player last saved/loaded a state to/from, so that the dialog box to select a state to save/load reopens at that folder.
After reading the previous commit, you might think "hold on, what's the
difference between GetProfileName and GetProfileDirectoryName"? These
two are being used for the exact same thing - figuring out where
profiles are stored - yet they return different values for certain
controllers like GC keyboards! As far as I can tell, the existing code
has been broken for GC keyboards since they were introduced a decade
ago. The GUI (and more recently, also InputCycler) would write and read
profiles in one location, and our code for loading profiles specified in
a game INI file would read profiles in another location.
This commit gets rid of the set of values used by the game INI code in
favor of the other set. This does breaking existing setups where a
GCKey profile has been configured in a game INI, but I think the number
of working such setups is vanishingly small. The alternative would make
existing GCKey profiles go missing from the profile dropdown in the GUI,
which I think would be more disruptive. The alternative would also force
new GCKey profiles into the same directory as GCPad profiles.
This commit also fixes a regression from d6c0f8e749. The Android GUI was
using GetProfileName to figure out what key to use in the game INI,
which made it use incorrect game INI entries for GameCube controller
profiles but not Wii Remote profiles. Now the Android GUI uses
GetProfileKey for this, fixing the problem.
Core::RunAsCPUThread is obsoleted by CPUThreadGuard reference already passed into the function. The nonsense lambda in CheatSearchWidget is from changes in fdb7328c73.
This reverts the parts of commit c8c9928eb1 that made translatability
worse rather than better. Changing "Error in column %2" to "%1 in column
%2" not only means that the translators have to check the i18n comments
to know what word hides behind %1, but there's also the problem that
the translator might need to translate "Error" in this context
differently from the standalone string "Error". Having to copy-paste
some HTML tags may be annoying for translators, but it's a far less
serious problem.
This fixes an issue where the game specific graphics backend would be saved as the global setting after playing a game.
This also now displays the currently running graphics backend when looking in the graphics configuration window.
Given how many member functions make use of the system instance,
it's likely just better to pass the system instance in on construction.
Makes the interface a little less noisy to use.
Previously we were always taking the buffer by value, even if it wasn't
being stored anywhere and only read from.
We can use a std::span for the same thing.
The Disabled state sits between Game Closed and completely Shutdown - stronger than the former, as it refuses to let a game be opened again until AchievementManager is restored (which only happens upon a fresh core boot) but it isn't completely shut down and will still allow the player to be logged in and access the achievement settings and their (global) achievement header.
This adds the actual switch to turn on Hardcore Mode to the settings tab of the Achievements dialog. It is accompanied by a large tooltip warning explaining what it does and when it can be enabled.
The switch is only enabled to be turned on when no game is running, so that games are started in hardcore mode and can only be loaded via the console's memory card, as in the original hardware. Hardcore may be turned off while a game is running, but cannot be turned back on until the game is disabled.
The toggle trigger for hardcore mode also automatically disables the settings that are not allowed during hardcore mode.
Finally, the original flag in AchievementSettingsWidget to set whether things are enabled in hardcore mode (primarily Leaderboards) is replaced with the actual Hardcore Mode setting.
Play Input Recording would potentially unlock achievements without any player input and needs to be disabled. If a recording is already playing, hardcore mode cannot be enabled.
The player getting a better view of their surroundings than the game would normally allow could possibly give the player an advantage over the original hardware, so Freelook is disabled in hardcore mode. To do this, I disable the config flag for Freelook when it is accessed, to make sure that it is disabled whether it was enabled before or after hardcore mode was enabled.
Memory patches would be an easy way to manipulate the memory needed to calculate achievement logic, so they must be disabled. Riivolution patches that do not affect memory are allowed, as they will be hashed with the game file.
Debug Mode gives players direct read and write access to memory, which could be used to completely manipulate RetroAchievements logic and therefore is not allowed in hardcore mode.
Frame advancing is easily exploitable for slowing down a game and artificially improving reaction times and is not allowed in RetroAchievements hardcore mode.
While saving states is allowed (especially for the purpose of debugging), RetroAchievements does not allow loading saved states when hardcore mode is on.
This widget will be used in several places to notify the player that a feature has been disabled because hardcore mode is on. It includes a button to open the Achievement Settings so that Hardcore Mode may be turned off. Also included is the framework required to open AchievementsWindow specifically on the Settings tab.
Some state changes are meant to be near instantanoues, before switching to something else. By reporting ithe instant switch, the UI will flicker between states (pause/play button) and the debugger will unnecessarily update. Skipping the callback avoids these issues.
This makes it so that if you just want to reload the current style (eg. on program start, or in response to a system event), you don't need to know the name of the currently selected user style. It's also more consistent with the way the 'userstyle/enabled' flag works.
At the end of each frame automatically update the Current Value for
visible table rows in the selected and visible CheatSearchWidget (if
any). Also update all Current Values in all CheatSearchWidgets when the
State changes to Paused.
Only updating visible table rows serves to minimize the performance cost
of this feature. If the user scrolls to an un-updated cell it will
promptly be updated by either the next VIEndFieldEvent or the State
transitioning to Paused.
The table only needs to be recreated when the displayed addresses might
change. If we're just refreshing the current values then update those
table cells and leave the rest of the table alone.
A new tab is added to the Achievements dialog to chart out the leaderboards in a table. Each row of the table contains the leaderboard information and up to four relevant entries, varying based on how many entries are in the leaderboard, whether or not the player has a submitted score, and where in the leaderboard the player's score is.
The achievement badges will now have a blue or gold border to identify whether they have been unlocked in softcore or hardcore mode. Similarly, the game badge will have a blue border if all achievements have been unlocked in either mode or a gold border if all achievements have been unlocked in hardcore mode.
Provided the badges are turned on in the settings, each achievement will have a badge next to it on the progress tab. There are different badges for locked and unlocked (usually locked is grayscale while unlocked is in color but not necessarily) and the badge chosen depends on the player's current unlock and hardcore status.
Provided badges are turned on, if there's a player logged in their RetroAchievements icon will appear next to their player info in the header of the Achievements dialog. If they're playing a game, so will the icon for the game. Also performed some refactoring and reorganizing to the header as a whole so that it looks consistent whether a game is running or not.
This refactors the Rich Presence generation to store to a member field that can be exposed to the UI to display the Rich Presence in the achievement header. It still updates at its original rate of once per two minutes, but calls an update on the dialog when that ticks.
Moved AchievementManager Init further down in the MainWindow constructor; its original position was because it had an impact on the contents of the menu bar, and this is no longer the case.
Because CPU thread config changed callbacks are no longer instant,
g_Config.iEFBScale doesn't yet contain the new value when the hotkey OSD
code tries to read it.
Should fix https://bugs.dolphin-emu.org/issues/13343.
There's no reason not to allow this now that these settings are
cleanly integrated into the new config system. (Actually, maybe
we could even have done this before the previous commit...)
This fixes a problem where changing the JIT debug settings on
Android while a game was running wouldn't cause the changed settings
to apply to code blocks that already had been compiled.
The previous list had some issues. A lot of variant id's were set to 0x0000. Althought this works for some figures, on a technicallity implemented into the games, they are technically wrong and don't result in exactly the same experience as the real figures. For example, the previous small fry got a "series 1" text in the summon screen. The real small fry does not have this. I also added figure types so I can add seperate generation logic later.
The Kaos element only applies to 3 items. So, I decided to throw it under others since it's not listed as an element in the manual and you can easily search for Kaos
GCAdapter::UseAdapter() reads s_is_adapter_wanted, which gets
initialized by config_guard.~ConfigChangeCallbackGuard(). So we must
wait until after destroying the config guard to know whether we have any
controllers set to GC Adapter.
Expanded the use of the lock mutex already used for loading the player's existing unlock status to guard against races involving the Achievements dialog window reading from data AchievementManager might be in the process of updating. The lock has been exposed publicly and the AchievementsWindow uses it in its UpdateData method, and anywhere else that might modify data used to render that window has also been wrapped with it.
AchievementManager now has a SetUpdateCallback method for providing a single universal callback for anytime something important changes in the achievement state, such as logging in/out, game load/close, or events such as achievement unlocks. AchievementsWindow sets this callback in its own init to its UpdateData method so that the AchievementsWindow gets updated when one of these changes takes place.
This widget is a tab in the AchievementsWindow that displays the player's current achievement progress: which achievements are locked or unlocked, and the progress of achievements that have progress metrics.
This widget displays a header on the AchievementsWindow dialog above the tabs that shows the currently logged in user (if there is one) and the game they are playing (if there is one).
1 ) When first opened, the (user selected) post process shader config widget would print the wrong values on the text label next to int range sliders. For example if the range was from 1 to 6, and the value loaded from the config was 1, the label would print 0 when first opened, to then start showing the correct value once the slider was first moved.
This mirrors the behaviour of the float slider code below:
```auto* const value_box = new QLineEdit(QString::asprintf("%f", m_config_option->m_float_values[i]));```
2 ) The defautl int slider value would also be set wrong on first load, as it was being divided by the slider max instead of the slider step amount (again, just like for the float implementation). This is a mistake I had made with my previous submission.
This doesn't need to be handled by translators, since they're not
user-displayed text or just don't need to be translated.
While we're at it, we don't need to copy each entry of the resulting
list.
Mesa (llvmpipe) only reports 4x MSAA, and doesn't report 2x (or 1x, but we implicitly add that). The old logic did not handle this correctly, causing selecting 4x to fail and fall back to None.
This also removes VideoUtils::GetAvailableAntialiasingModes, and thus VideoUtils entirely, as its only other function was removed in 1f74653501.
We can move the construction of the Diff instance into the body of the
if statement, so that we only construct this if the condition is true.
While we're at it, we can move the symbol description string into the
instance, getting rid of a copy. The function itself can also be const
qualified.
Adds features to improve navigation of Skylanders portal menu, includes:
-List of Skylanders and filters for searching
-Improved buttons for faster loading options
-Added default user folder for storing .sky files
AchievementSettingsWidget is a dialog widget in AchievementsWindow for handling RetroAchievements settings in the user interface. This class contains the physical layout, widget connections, load/save functions and button responses. AchievementsWindow now has a tabbed list that this is inserted into; other tabs will be in a later pull request.
AchievementsWindow is the dialog box that will eventually contain the settings and progress data for RetroAchievements on Dolphin. This adds the barebones dialog, and connects it to MainWindow's MenuBar.
Adds two new hotkeys to open the menus for emulated USB devices- Skylanders Portal of Power and the Infinity Base. (Hotkeys only active when game is running).
Portal menu: Default is <Ctrl+P>.
Infinity base: Default is <Ctrl+I>
-The float sliders initial value wasn't calculated correctly
-Fix the checkbox dependencies not being applied until a setting was changed for the first time
ESCore implements the core functionality that can also be used outside of emulation. ESDevice implements the IOS device and is only available during emulation.
This reverts commit cfe3683668.
On Windows systems with 125% DPI scaling, this was causing both icons
and the OSD to be upscaled by 25% using nearest neighbor scaling, which
looks really bad. shuffle2 has said that this will be improved later,
but we should revert it for now for the sake of the upcoming beta build.
The old tooltip description box used GraphicsWidget to provide shared
code to the Graphics config panes for adding descriptions to their
settings.
The description box has been replaced by BalloonTips and serves no
further purpose, so remove it and have the Graphics panes derive from
QWidget instead.
GraphicsInteger is used by the panes in the Graphics config window to
create spin boxes that change their associated config setting, and
update their own state when something else changes the config setting.
Despite its current name nothing about this class is particular to the
Graphics window, so renaming it to ConfigInteger better reflects its
purpose. This should also make it less confusing when ConfigIntegers
are added to other config windows.
GraphicsSlider is used by the panes in the Graphics config window to
create sliders that change their associated config setting, and update
their own state when something else changes the config setting.
Despite its current name nothing about this class is particular to the
Graphics window, so renaming it to ConfigSlider better reflects its
purpose. This should also make it less confusing when ConfigSliders are
added to other config panes.
GraphicsRadioInt is used by the panes in the Graphics config window to
create radio buttons that change their associated config setting, and
update their own state when something else changes the config setting.
Despite its current name nothing about this class is particular to the
Graphics window, so renaming it to ConfigRadioInt better reflects its
purpose. This should also make it less confusing when ConfigRadioInts
are added to other config panes.
m_xrr_config was used by the GeneralWidget::GetAvailableResolutions
function to get the list of supported fullscreen resolutions when
HAVE_XRANDR was set. aa4088a removed the ability to set that resolution
in the UI, leaving the GetAvailableResolutions function unused.
m_xrr_config is initialized in MainWindow which still uses it to toggle
fullscreen, but the references in GeneralWidget and GraphicsWidget
(which just ferried m_xrr_config from MainWindow to GeneralWidget) are
now unnecessary and removed in this commit.
Fixes dynamically changing dpi scaling.
Load resources from svg if possible.
Currently svg support is not in Qt build in Externals,
and image files need to be added later.
GraphicsChoice is used by the panes in the Graphics config window to
create combo boxes that change their associated config setting, and
update their own state when something else changes the config setting.
Despite its current name nothing about this class is particular to the
Graphics window, so renaming it to ConfigChoice better reflects its
purpose. This should also make it less confusing when ConfigChoices are
eventually added to the other config windows.
QApplication should parse and remove and args it recognizes
before dolphin starts inspecting the args.
This allows using e.g. -style <style> on the commandline.
GraphicsBool is used by the panes in the Graphics config window to
create checkboxes that change their associated config setting, and
update their own state when something else changes the config setting.
Despite its current name nothing about this class is particular to the
Graphics window, so renaming it to ConfigBool better reflects its
purpose. This should also make it less confusing when ConfigBools are
eventually added to the other config windows.
In older versions of Dolphin GraphicsBoolEx was used to create a pair of
radio buttons selecting one of Virtual XFB and Real XFB, but this was
removed with the introduction of Hybrid XFB in 65cd085f.
In the meantime GraphicsRadioInt was introduced to allow for Graphics
radio buttons with multiple options, so GraphicsBoolEx is now redundant.
